Box sealing machines are one of the indispensable equipment in the modern logistics industry. They can greatly improve packaging efficiency and quality. However, during long-term use of the box sealing machine, some minor faults will inevitably occur. One of the most common problems is that the tape keeps coming down. So, how to fix the problem that the tape of the box sealer always hangs down? Below, I will give you a detailed introduction.
1. Causes of the problem
First of all, we need to understand why the tape always hangs down. Generally speaking, this situation is mainly caused by insufficient tape tension or uneven tape cutting. When the tape tension is insufficient, the tape will droop down. When the tape is cut unevenly, one side of the tape will be long and the other side will be short, which will also cause the tape to droop down.
2. Solutions
1. Adjust tape tension
First, we need to check the tape tension. If the tape tension is insufficient, we can solve the problem by adjusting the tape tension. The specific methods are as follows:
(1) Find the tape tension adjustment knob on the box sealer.
(2) Turn the knob counterclockwise by a certain angle to increase the tension of the tape.
(3) Test whether the tape tension is suitable. If it still hangs down, adjust it again appropriately.
2. Adjust tape cutting
If the tape tension has been adjusted to the right position, but the tape still hangs down, then we need to check the tape cutting. If the tape is not cut evenly, we can solve the problem by adjusting the tape cutting. The specific methods are as follows:
(1) Find the tape cutting adjustment knob on the box sealer.
(2) Turn the knob counterclockwise by a certain angle to reduce the cutting length of the tape.
(3) Test whether the tape is cut properly. If it still hangs down, adjust it again appropriately.
3. Replace tape
If neither of the above methods can solve the problem, then we need to consider replacing the tape. Because the tape is aging or of poor quality, the tape will also cause the tape to droop. It is recommended to choose high-quality tape and replace the tape regularly.
3. Summary
The sticking down of box sealer tape is a very common problem, but it is also easy to solve. We just need to solve the problem by adjusting the tape tension, cutting the tape or replacing the tape. I hope this article can be helpful to everyone.